Aerodynamics of smart flap under ground effect

Aerodynamic characteristics of two-dimensional smart flap under the ground effect have been assessed by a numerical simulation. In this process, a pressure-based implicit procedure to solve Navier–Stokes equations on a nonorthogonal mesh with collocated finite volume formulation is used. The boundedness criteria for this procedure are determined from the Normalized Variable Diagram (NVD) scheme. The procedure incorporates the k–ε eddy–viscosity turbulence model. Cantilever beam with uniformly varying load with roller support at the free end is considered for the configuration of the smart flap. The method is first validated against experimental data. Then, the algorithm is applied for turbulent aerodynamic flows around airfoil with smart and conventional flaps for different attack angle, flap angle and ground clearance where the results of two flaps are compared. The comparisons show that the quality of the solution is considerable.     

Development of wireless strain-gauge measurement system for structural tests

A wireless sensor system for data acquisition and processing during structural and fatigue tests is considered. A prototype of wireless strain-gauge measurement system is used in fatigue tests of a utility helicopter’s main rotor hub. The setup of the test rig and software are described.     

Integrated acoustic monitoring system for jet fuel tanks

The paper describes a device and a technique of forming the information processing algorithms used in the integrated acoustic monitoring system for jet fuel tanks, intended for monitoring the level, density and mass of liquid products.     

Determination of characteristic frequencies of elastic oscillations of the <Emphasis Type="Italic">International Space Station</Emphasis> construction

The results of investigating free oscillations of the International Space Station construction appearing during spacecraft docking and undocking are described. The study is carried out using the measurement data of the low-frequency MAMS accelerometer. Several intervals of measurements performed in 2005 and 2006 were chosen to be studied. For chosen intervals, only the data intervals corresponding to the process of free attenuation of the oscillations construction elements were analyzed. Characteristic frequencies of elastic oscillations of the station construction and attenuation coefficients corresponding to them are found. The comparative analysis of the results obtained for various docking ports (nodes) is carried out. The described study is performed as a part of the technical experiment “The ISS Environment” carried out onboard the station in accordance with the Russian program of scientific and engineering experiments.     

Sunspot cycle 23 descent to an unusual minimum and forecasts for cycle 24 activity

The decay phase of the sunspot cycle 23 exhibited two unusual features. First, it lasted too long. Second, the interplanetary magnetic field intensity at earth orbit reached the lowest value since in situ measurements in space began in October 1963. These physical anomalies significantly altered the early forecasts for the sunspot activity parameters for cycle 24, made by several colleagues. We note that there was a significant change in the solar behavior during cycle 22. We discuss the observed trends and their effect on our empirical solar activity forecast technique, leading to our prediction for cycle 24 parameters; cycle 24 will be only half as active as cycle 23, reaching its peak in May 2013. We speculate on the possible implications of this outcome on future earth climate change and the ensuing socio-economic consequences.     

Algebraic operations on graphs with using numeric coding for simulating the systems of rocket and space technology

The paper adduces the relators for algebraic operations on graphs using the numeric codes of the graphs. The special algebra of codes has been devised with consideration of the principles of graph transformation. This paper demonstrates the relevance of numeric coding of graphs for solving the problems of enumeration, systematization, and compact representation of the information about the structural and functional characteristics of the systems of flow distribution and conversion of rocket and space technology and for conducting the modeling transformations of given systems in the course of the structural and functional studies as well.     

The Relativistic Proton Spectrometer (RPS) for the Radiation Belt Storm Probes Mission

The Relativistic Proton Spectrometer (RPS) on the Radiation Belt Storm Probes spacecraft is a particle spectrometer designed to measure the flux, angular distribution, and energy spectrum of protons from ～60 MeV to ～2000 MeV. RPS will investigate decades-old questions about the inner Van Allen belt proton environment: a nearby region of space that is relatively unexplored because of the hazards of spacecraft operation there and the difficulties in obtaining accurate proton measurements in an intense penetrating background. RPS is designed to provide the accuracy needed to answer questions about the sources and losses of the inner belt protons and to obtain the measurements required for the next-generation models of trapped protons in the magnetosphere. In addition to detailed information for individual protons, RPS features count rates at a 1-second timescale, internal radiation dosimetry, and information about electrostatic discharge events on the RBSP spacecraft that together will provide new information about space environmental hazards in the Earth’s magnetosphere.     

Investigation of phase transition-based tethered systems for small body sample capture

This paper summarizes the modeling, simulation, and testing work related to the development of technology to investigate the potential that shape memory actuation has to provide mechanically simple and affordable solutions for delivering assets to a surface and for sample capture and possible return to Earth. We investigate the structural dynamics and controllability aspects of an adaptive beam carrying an end-effector which, by changing material equilibrium phases, is able to actively decouple the end-effector dynamics from the spacecraft dynamics during the surface contact phase. Asset delivery and sample capture and return are at the heart of several emerging potential missions to small bodies, such as asteroids and comets, and to the surface of large bodies, such as Titan.